激光切割鋁板的切面像切其他材質一樣光滑嗎？鋁板切口一樣也是光滑的，鋁板只是高反光材料，需要大的激光發生器，切割氣體同其他材料一樣，都是用氮?dú)馇懈?，不?huì)造成表面不光滑的。
Is the cutting surface of laser cutting aluminum plate as smooth as cutting other materials? The cut of the aluminum plate is also smooth, and the aluminum plate is only a highly reflective material that requires a large laser generator. The cutting gas, like other materials, is cut using nitrogen gas, which will not cause a smooth surface.
鋁板采用激光切割特點：
Aluminum plate adopts laser cutting features:
1、切割縫細：激光切割鋁板的割縫一般在0.1mm-0.2mm
1. Cutting seam thickness: The cutting seam of laser cutting aluminum plate is generally 0.1mm-0.2mm
2、切割面光滑：激光切割鋁板的切割面無毛刺無掛渣。
2. Smooth cutting surface: The cutting surface of laser cut aluminum plate is free of burrs and slag.
3、熱變形?。杭す饧庸さ募す飧羁p細、速度快、能量集中，因此傳到被切割材料上的熱量小，引起材料的變形也非常小。
3. Low thermal deformation: Laser cutting is characterized by fine slits, fast cutting speed, and concentrated energy, resulting in minimal heat transfer to the material being cut and minimal deformation of the material.
4、節省材料：激光加工采用電腦編程，激光設備可以把不同形狀的鋁板加工件進行材料的套裁，提高鋁板的材料利用率，節省大量的材料成本。
4. Material saving: Laser processing uses computer programming, and laser equipment can perform material cutting on aluminum plate processing parts of different shapes, improving the material utilization rate of aluminum plates and saving a lot of material costs.
5、能切多厚鋁板主要看激光發生器的功率，一般6000W的厚能切到16mm，4500W能切到12mm。
5. The thickness of aluminum plates that can be cut mainly depends on the power of the laser generator. Generally, 6000W can be cut to 16mm at the thickest, and 4500W can be cut to 12mm.
鋁板屬于高反材料，對激光器的損傷很大!一般不會建議客戶去拿光纖激光切割機去切割鋁板，盡量少用!
Aluminum plate is a highly reflective material that causes significant damage to the laser! Generally, it is not recommended for customers to use a fiber laser cutting machine to cut aluminum plates, and use it as little as possible!
